Re: Alternator Testings -at- 481 hz

["Tesla list" <tesla-at-pupman-dot-com>]

Original poster: "harvey norris by way of Terry Fritz <twftesla-at-qwest-dot-net>" <harvich-at-yahoo-dot-com>


--- Tesla list <tesla-at-pupman-dot-com> wrote:
> Original poster: "Ed Phillips by way of Terry Fritz
> <twftesla-at-qwest-dot-net>" <evp-at-pacbell-dot-net>
> 
> Tesla list wrote:
> > 
> > Original poster: "harvey norris by way of Terry
> Fritz
> <twftesla-at-qwest-dot-net>" <harvich-at-yahoo-dot-com>
> > 
> > HI ALL,
> > concerning the possibility of running a tesla coil
> > from the higher frequencies of an alternator,
> 
> 	In the "good old days of spark" many commercial
> transmitters used 500
> cycle generators to feed the primary of the HV
> transformer.  Gave a
> "note" which was apparently more distinctive and
> easier to read through
> static.  
> 
> Ed
> 
Yes, the presense of a noise resembling a high pitch
seems to come from the largest plexiglass plate (1-2
nf range)capacitor used being to resonate
(unsuccesfully as yet)some high induction coils. It
would appear that the tuning for a ~60 henry coil is
very tight, and that its interwinding capacitance
prevents it from acheiving full resonance, by
observing what little conduction it can recieve. The
voltage can get high enough about 800 volts input
after step up transformer to arc around the plate
edges, which at night viewing shows a line of corona
around the plate edges from bridging the 1/16 plate
edges by arc.  HDN
> 


=====
Binary Resonant System  http://members3.boardhost-dot-com/teslafy/

__________________________________________________
Do You Yahoo!?
Send instant messages & get email alerts with Yahoo! Messenger.
http://im.yahoo-dot-com/