[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: performance problems + secondary burn II.



Original poster: "Leto Tokarev by way of Terry Fritz <twftesla-at-qwest-dot-net>" <leto-at-irisz.hu>

> today my secondary melted down :) almos exactly on the middle, like 10
> turns seems to be overheated. the varnish evaporated, and this ten turn
> moved down a bit. 

er, the question should be: 
is it means that i had a voltage maximum where the thing melted?
how can i move this point to the upper en of the coil?:)



Leto