RE: Triggered gap and safety gaps

["Tesla list" <tesla-at-pupman-dot-com>]

Original poster: "Ted Rosenberg by way of Terry Fritz <twftesla-at-qwest-dot-net>" <Ted.Rosenberg-at-radioshack-dot-com>

Mike, All:
I drew a simple pictorial and saved it as a JPG. I e-mailed it to Marc
Metlicka. he indicated he would send it to Terry for putting somewhere on
the hotstreamer server. That's all I know at the moment.

http://hot-streamer-dot-com/temp/MetlickaGap

Although I will use a 15mF/330V run cap, Marc says that the value is not
critical.
If you wish I can e-mail that JPG off list.
Hopefully, I will complete my coil rebuild along with the trigger gap, in
about 1-2 weeks.
Then, I assure you, I will publish all pertinent details in so far as my
setup is concerned.

Safety First

Ted

-----Original Message-----
From: Tesla list [mailto:tesla-at-pupman-dot-com]
Sent: Monday, July 30, 2001 7:42 PM
To: tesla-at-pupman-dot-com
Subject: Re: Triggered gap and safety gaps


Original poster: "by way of Terry Fritz <twftesla-at-qwest-dot-net>"
<CHURCHMON-at-aol-dot-com>

Hi list and Mark 
With all the talk of Triggered gaps is there a circuit conf.(schematic)which

everyone is going with? The reason I ask is I have bunch of run caps with 
values raging from 
10uf. to 50uf. a 500watt dimmer  and a Accell Super coil to work with.I just

don't want 
to blow something up 

Thanks, Mike Church