[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: Planning TC

To: tesla-at-pupman-dot-com
Subject: Re: Planning TC
From: "Tesla list" <tesla-at-pupman-dot-com>
Date: Tue, 31 Jul 2001 16:23:09 -0600
In-Reply-To: <200107311831200150.000C97FA-at-www.poczta.fm>
References: <200107301507570630.0060FA57-at-www.poczta.fm><200107301517240070.00699F65-at-www.poczta.fm>
Resent-Date: Tue, 31 Jul 2001 16:23:06 -0600
Resent-From: tesla-at-pupman-dot-com
Resent-Message-ID: <yhsdTD.A.bwC.I_yZ7-at-poodle>
Resent-Sender: tesla-request-at-pupman-dot-com

Original poster: "Terry Fritz" <twftesla-at-qwest-dot-net>

Hi Kamil,

A pretty good basic post explaining cap sizing is at:

http://www.pupman-dot-com/listarchives/2000/August/msg01085.html

Let me know if you have questions.

Cheers,

	Terry

At 06:31 PM 7/31/2001 +0200, you wrote:
>Hi !
>
>Could You tell me what will be the best size of the taank capacitor for 10kV 
>100mA NST? 
>Is LTR a good choice? What will be the LTR size for my transformer?
>Perhaps You can give me also other advice, and construction hints?
>What kind of spark gap will be the best, what frequency of primary and 
>secondary circuit 
>will give beas performance, etc. ?
>
>Thank You for all help.
>
>Kamil Kompa
>
>
>-----------------------------------------
>Dla Ciebie: cyfrowy aparat fotograficzny?
>http://tropiciel.interia.pl/trofea
>

Prev by Date: Re: First light
Next by Date: Re: Triggered gap and safety gaps
Prev by thread: Planning TC
Next by thread: Bonsai
Index(es):
- Date
- Thread