[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: need help on this one

Original poster: "Terry Fritz" <twftesla-at-uswest-dot-net>

Hi Tyler,

At 11:49 AM 2/7/2001 -0700, you wrote:
>OK guys pull out your calculators.
>I am running 2 modified NST's on my 12 inch coil at 12/400 ( yes thats
>12,000 vac and 400ma) .  I have been reading a lot about LTR caps and that
>NST's just love them.  I ran the numbers through wintesla and came up with
>about .09 mfd for the mmc.  I am running a srsg at 120 bps.  I was planning
>on using a .1mfd cap so that it was just a little bigger than what was
>needed but i want the pros opinion.
>What size should i use for my mmc

I get a whopping 224nF!  90 amps RMS.

>Also i have a smaller coil that is running a 12/200 with a srsg at 120bps.
>what should this value be for the mmc.

1/2 or 112nF.  45 amps RMS



>Thank you all