[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: pig in overdrive...



Original poster: "Paul Marshall by way of Terry Fritz <twftesla-at-uswest-dot-net>" <klugmann-at-hotmail-dot-com>

I have personally operated my pig (14.4 Kv) at 480v input. 28.8 Kv out. The 
info I read on pigs (14.4) says that they are tested at 50 Kv. No failures 
allowed.


>From: "Tesla list" <tesla-at-pupman-dot-com>
>To: tesla-at-pupman-dot-com
>Subject: pig in overdrive...
>Date: Sun, 25 Feb 2001 20:20:17 -0700
>
>Original poster: "BunnyKiller by way of Terry Fritz <twftesla-at-uswest-dot-net>" 
><bigfoo39-at-telocity-dot-com>
>
>Hi All...
>
>been kicking around an idea of supplying about 300-325V to a 10KVA piggie (
>14.4KV/240V type)
>
>at 14.4KV the peak to peak is about 20KV  and at 300V in we should see
>about 25KV peak to peak
>on the output side...   do yall think the insulation on the hi volt side is
>good for 25KV????
>
>at present i have run the voltage up to 280V in  via variac with no
>noticable side effects (
>other than longer streamers ;)  )
>
>also ..  has anyone here paralleled the output side of 2 10KVA piggies??  (
>for a 20KVA setup)
>
>thinkin again...
>
>
>Scot D
>
>
>
>

_________________________________________________________________________
Get Your Private, Free E-mail from MSN Hotmail at http://www.hotmail-dot-com.