Re: Pig capacitor

["Tesla list" <tesla-at-pupman-dot-com>]

Original poster: "Drew Murray by way of Terry Fritz <twftesla-at-uswest-dot-net>" <drewallmighty-at-hotmail-dot-com>

Alan,
I wish i could get my hands on a cap like that. It would work perfectly with 
my pt and coil configuration. My advice to you would be to mail them to me! 
(joke)
Go ahead, as long as you think the voltage rating is sufficient, try them 
out. You can put them both in a series for increased voltage rating or,
you can put them in parallel to increase capacitance.(recommended)
I would suggest trying them in a series first; just to be on the safe side. 
10kv is not too much and will work well on most capacitors. My pt is running 
at 10500v -at- 100ma (1kva) and i have a homemade zip lock baggie stacked plate 
capacitor.
                                                      Good luck,
                                                    Drew Murray


_________________________________________________________________________
Get Your Private, Free E-mail from MSN Hotmail at http://www.hotmail-dot-com.