[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: alternative bleeder resistor wiring?



Original poster: "Bill Vanyo by way of Terry Fritz <twftesla-at-qwest-dot-net>" <vanyo-at-echoes-dot-net>

I wrote:
[snip]
> ... one problem is that my bleeder resistors (10MegOhm 1/2
> Watt from allelectronics) are barely longer (with leads) than the caps
> themselves, making construction difficult  without soldering a little
> bit of wire for each resistor ...
[snip]

Of course, what would be really good is to find some suitable resistors
with significantly longer leads.

	- Bill V.