[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

RE: Spark Gap question



Original poster: "Alex Madsen by way of Terry Fritz <twftesla-at-qwest-dot-net>" <alexmadsen-at-yahoo-dot-com>

Have you considered a trigger gap. They are relatively easy to make and work
well.
Alex Madsen

--- Tesla list <tesla-at-pupman-dot-com> wrote:
> Original poster: "Johnson, Jeffrey D -at- PWC by way of
> Terry Fritz <twftesla-at-qwest-dot-net>"
> <jeffrey.d.johnson-at-l-3com-dot-com>
>
> This question is regarding the famous RQ/TCBOR gap.
> I've read that you
> should use 1.5" copper pipe and figure on 1000 V per
> gap.  If I'm running a
> 15kV NST that means I need 2 to 3 six gap assemblies
> in series.  Can't I
> just use 1" pipe and put 15 2" pieces inside a 6"
> section of PVC?
>
> JJ
>
>
>
>


__________________________________________________
Do You Yahoo!?
Get email alerts & NEW webcam video instant messaging with Yahoo!
Messenger. http://im.yahoo-dot-com



_________________________________________________________
Do You Yahoo!?
Get your free -at-yahoo-dot-com address at http://mail.yahoo-dot-com