[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: ebay wire



Original poster: "Richard Williams by way of Terry Fritz <twftesla-at-qwest-dot-net>" <richardwwilliams-at-earthlink-dot-net>

Hey Godfrey,

By the way, that's #23 1/2 gauge, 453 cir. mils, about 1/2 amp current
capability I would think.
A large induction coil? What size are you planning on with that much
wire?!?!

Rick W.
SLC


----- Original Message -----
From: Tesla list <tesla-at-pupman-dot-com>
To: <tesla-at-pupman-dot-com>
Sent: Wednesday, February 13, 2002 10:22 PM
Subject: Re: ebay wire


> Original poster: "Richard Williams by way of Terry Fritz
<twftesla-at-qwest-dot-net>" <richardwwilliams-at-earthlink-dot-net>
>
> Hey Godfrey,
> If your close then can you go see the spool? The damage to look for is cut
> wire but even if some is cut it would take one heck of an impact to affect
> the wire all the way through. It also depends what impacted the wire. A
> blunt object wouldn't leave much damage in the wire underneath but a sharp
> object could very well cut strands quite a way through the spool.
>
> If you can then personally check the wire, after all, 94 pounds of wire is
> quite expensive and the cost of the trip would probably be a lot less than
> the cost of the wire itself.
>
> Rick W.
> SLC
>
>
> ----- Original Message -----
> From: Tesla list <tesla-at-pupman-dot-com>
> To: <tesla-at-pupman-dot-com>
> Sent: Wednesday, February 13, 2002 9:37 PM
> Subject: ebay wire
>
>
> > Original poster: "Loudner, Godfrey by way of Terry Fritz
> <twftesla-at-qwest-dot-net>" <gloudner-at-SINTE.EDU>
> >
> > Hello All
> >
> > This spool of wire has a damaged area. Does an impact spoil the spool?
I'm
> > looking for wire to build a large induction coil. The spool is
> > geographically close to me and I might be able to get it for a
reasonable
> > price. Writing out the address does not seem to work, so the ebay item
> > number is 1705371403.
> >
> > Godfrey Loudner
> >
> >
> >
> >
> >
>
>
>