Re: Need help!/ These good??

["Tesla list" <tesla-at-pupman-dot-com>]

Original poster: "S & J Young by way of Terry Fritz <twftesla-at-qwest-dot-net>" <youngs-at-konnections-dot-net>

Steve,

My MMC is made of caps from Madisound.  I have 2,000 volt caps - looks like
they are sold out of those.  The 1200 volt caps are fine.  They have carried
these for a few years now, and they might give you an even better bargain to
get rid of them.  (The less than 1 mF caps are not of much use for audio
stuff - crossovers, etc.)

I recommend more than one string to handle the current.
--Steve Young


----- Original Message -----
From: "Tesla list" <tesla-at-pupman-dot-com>
To: <tesla-at-pupman-dot-com>
Sent: Saturday, July 27, 2002 12:13 PM
Subject: Need help!/ These good??


> Original poster: "Steven Ward by way of Terry Fritz <twftesla-at-qwest-dot-net>"
<srward16-at-hotmail-dot-com>
>
> HI list,
>
> Well now i understand that im screwed for trying to find these caps so i
> found some other ones.  They are at
>
> http://www.madisound-dot-com/gecaps.html
>
> oddly enough.  The ones im looking at are the 42l series, the ,68uf
-at-1200v.
> Is that voltage rating high enough for MMC use??I would have to get by on
a
> single string of 25.  That would be 30000v -at- .0272 uf, so LTR for my
15/120
> PSU.  So what do you all think???  Will one string handle all of that
> current??  Thanks,
>
> Steve Ward.
>
>
>