[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: circuit board makers



Original poster: "Christopher Boden by way of Terry Fritz <twftesla-at-qwest-dot-net>" <chrisboden-at-hotmail-dot-com>

Contact www.4pcb-dot-com and tell them The Geek Group sent you :)

Or, get a Dremel and whip up a simple jig and you're set.




Christopher "Duck" Boden Geek#1
President / C.E.O. / Alpha Geek
The Geek Group
www.thegeekgroup-dot-org
Because the Geek shall inherit the Earth!


Natives who beat drums to drive off evil spirits are objects of scorn to 
smart Americans who blow horns to break up traffic jams.
     - Mary Ellen Kelly

It is odd, but on the infrequent occasions when I have been called upon in 
a formal place to play the bongo drums, the introducer never seems to find 
it necessary to mention that I also do theoretical physics.
     - Richard Feynman, 1918 - 1988



>Original poster: "Crow Leader by way of Terry Fritz <twftesla-at-qwest-dot-net>" 
><tesla-at-lists.symmetric-dot-net>
>
>Are there any places like pcb123-dot-com or whatever that will CUT up yout
>finished boards to the size you want? I"m looking for some boards around 2"
>x 10" or so.
>
>I'm not going to pay to have a circuit board made if  I have to take a hack
>saw to it to give it the "finishing touches." I can make awful, distorted
>crooked boards at home already, and want to do nothing but solder parts to a
>proerly made board.
>
>KEN