Re: Tesla Power Controller - What am I missing? ? ? ?

["Tesla list" <tesla-at-pupman-dot-com>]

Original poster: "Yurtle Turtle by way of Terry Fritz <twftesla-at-qwest-dot-net>" <yurtle_t-at-yahoo-dot-com>

Do you have a schematic?

Adam
--- Tesla list <tesla-at-pupman-dot-com> wrote:
> Original poster: "Mccauley, Daniel H by way of Terry
> Fritz <twftesla-at-qwest-dot-net>"
> <daniel.h.mccauley-at-lmco-dot-com>
> 
> 
> 
> 
> I'm finally finishing up my design on my 120VAC
> Power Controller for use
> with 120VAC NST type coils.  If you think there is
> anything I need to add or
> change based on your experience, let me know:
> 
> Specifications:
> 
> Main Output 0-120VAC, 20A max adjustable via
> motorized 120VAC/20A variac
> Aux. Output 120VAC, 20A (on/off)
> Rotary Gap Output (120VAC, phase adjust or
> adjustable voltage selectable for
> both SRSG and ARSG)
> 
> -On/Off switch
> -Key safety switch
> -E-STOP control circuit
> -external E-STOP / Interlocks inputs
> -external remote operation inputs
> -output voltage meter with true RMS via custom PCB
> -output current meter with true RMS via custom PCB
> -10 segment voltage bar meter (for that knightrider
> coolness)
> -10 segment current bar meter (for that knightrider
> coolness as well)
> -Lamp Test
> -voltage crowbar circuit
> -current crowbar circuit
> -LED indicators for control power, each output ena,
> fault, interlock,
> e-stop, etc...
> 
> -On/Off dual button latch control for all outputs
> -standard variac for selectable phase adjust or arsg
> adjustable voltage
> 
> -Fused output for all
> -Fused control power
> 
> All this in a compact rack enclosure.
> 
> Missing anything????
> Dan
> 
> 
> 
> 


__________________________________________________
Do you Yahoo!?
New DSL Internet Access from SBC & Yahoo!
http://sbc.yahoo-dot-com