[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: Faraday cages



Original poster: "Brian by way of Terry Fritz <twftesla-at-qwest-dot-net>" <ka1bbg-at-webryders-dot-net>

Hi, let me try to clear a few things up being amatuer operator for a while.
I have worked 15 countries with only .100 watts of radiated power/////when
the band is open. So a TC with 500 or more watts if its only leaking a bit
of energy it surely is above .1 watts and radiating...and with todays
recievers of very high sensitivity very small radio signals can be heard for
thousands of miles. As someone already mentioned the low frequency and the
other uses at those frequencies should not be a big problem most of the
time. Being heard by a very sensitive reciever is NOT a good measure of
radiating signals. Sometimes interference can be reduced if the operating
frequency is moved up or down. I would be glad to try helping off list
ka1bbg-at-webryders-dot-net cul brian f.
----- Original Message -----
From: "Tesla list" <tesla-at-pupman-dot-com>
To: <tesla-at-pupman-dot-com>
Sent: Thursday, October 03, 2002 2:56 PM
Subject: Faraday cages


> Original poster: "Terry Fritz" <twftesla-at-qwest-dot-net>
>
> Hi Duncan,
>
> Here are some things you might check.
>
> Be sure the RF ground is good and solid.
>
> Use AC line filters to keep stuff from getting back into the AC wiring
where it
> can really get transmitted far.
>
> Ferrite beads (big ones) (like they use now on computer cables and such
(clip
> on)) on each side of the primary wiring to the spark gap can really cut
down on
> higher frequency noise.
>
> If you know who was having the problem and you can befriend them, they can
help
> you "test" things out too.
>
> I have thought of cages too but some people say they won't help much.  I
don't
> know enough about radio to say for sure but apparently they have to be
made
> "just right" to work well.  Perhaps our radio friends know more here ;-)
>
> Cheers,
>
>         Terry
>
>
> At 03:17 PM 10/3/2002 +0100, you wrote:
> >
> > Hi All
> >
> > does anyone operate their Tesla coils inside a Faraday cage? I had a
visit
> > today from the Radiocommunications Agency (UK), people complaining about
the
> > interference on their TV's.
> >
> > I will go ahead with a Farady cage to keep the neighbours quite, but is
it
> > worth sticking the coil inside one?
> >
> > Duncan (UK)
>
>
>
>
>