[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: TV transformers?



Original poster: "Mark Hales by way of Terry Fritz <twftesla-at-qwest-dot-net>" <markhals-at-dircon.co.uk>

But please be aware that "old" TVs (rare and collectable, may I add) used
mains derived EHT and this is LEATHAL.
If you're lucky enough to know an old engineer who has a junkbox of old TV
bits, don't treat them as you would flyback ccts.
Cheers, Mark.

----- Original Message -----
From: "Tesla list" <tesla-at-pupman-dot-com>
To: <tesla-at-pupman-dot-com>
Sent: Sunday, September 29, 2002 7:33 PM
Subject: Re: TV transformers?


> Original poster: "Jonathan Peakall by way of Terry Fritz
<twftesla-at-qwest-dot-net>" <jpeakall-at-madlabs.info>
>
> Adam,
>
> TV's do have a HV source in them for the CRT (cathode ray tube). These are
> known as flyback transformers. You can have a lot of fun with flybacks. I
> have a schematic and some details on my web site, if you want to look.
>
> HTH,
>
> Jonathan Peakall
>
> www.madlabs.info
>
>
> ----- Original Message -----
> From: "Tesla list" <tesla-at-pupman-dot-com>
> To: <tesla-at-pupman-dot-com>
> Sent: Saturday, September 28, 2002 5:55 PM
> Subject: TV transformers?
>
>
> > Original poster: "by way of Terry Fritz <twftesla-at-qwest-dot-net>"
> <Beans45601-at-aol-dot-com>
> >
> > Do TV's have high voltage transformers in them? Don't they need high
> voltage to
> > work the Crooks tube on the inside? Would these transformers work for
> Tesla
> > coil's?
> > Thanks
> > Adam
> >
> >
> >
> >
>
>
>