[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: Proximity of Components > Review Committee Approval?



Original poster: "D.C. Cox by way of Terry Fritz <twftesla-at-qwest-dot-net>" <resonance-at-jvlnet-dot-com>


Keep the coil small, ie, 3-4 ft. long sparks.

Keep the HV transformer supply in a separate aluminum housing and away from
the oscillator base.

Make the sec. coil with a 3/8 in brass stud in the bottom so it quickly
screws into the upper section of the oscillator base.

In this manner each part only weighs around 40 lbs or less and is easy for
1-2 persons to move around especially on a small cart.

Dr. Resonance




----- Original Message -----
From: "Tesla list" <tesla-at-pupman-dot-com>
To: <tesla-at-pupman-dot-com>
Sent: Tuesday, September 24, 2002 11:22 AM
Subject: Re: Proximity of Components > Review Committee Approval?


> Original poster: "by way of Terry Fritz <twftesla-at-qwest-dot-net>"
<FutureT-at-aol-dot-com>
>
> In a message dated 9/24/02 1:59:18 PM Eastern Daylight Time,
tesla-at-pupman-dot-com
> writes:
>
>
> >
> > I'm trying to make my TC as portable as possible. I
> > have thoughts of bringing it around to schools,
> > haunted houses etc. We're talking maybe a hundred
> > pounds here at least.
>
>
> Dan,
>
> How long do you want the sparks to be?
>
> John
>