RE: 6Kv/30mA

["Tesla list" <tesla-at-pupman-dot-com>]

Original poster: "Mudford, Chris by way of Terry Fritz <teslalist-at-qwest-dot-net>" <chris.mudford-at-agresearch.co.nz>

Hi Jeremy

Using a 6/'30 NST with a static gap and  15nF MMC I get ~8" multiple
streamers.  Althought the 3.75" secondary has too few turns (~600).

Cheers, Chris (NZ).

-----Original Message-----
From: Tesla list [mailto:tesla-at-pupman-dot-com]
Sent: Friday, 8 August 2003 3:37 a.m.
To: tesla-at-pupman-dot-com
Subject: 6Kv/30mA


Original poster: "Jeremy Scott by way of Terry Fritz
<teslalist-at-qwest-dot-net>" <supertux1-at-yahoo-dot-com>

So, just for fun I decided to hook up my 6Kv/30mA NST
to my 4.5" coil. The coil was designed for 15Kv/60mA,
so with a little adjusting of the SRSG it would fire
for 6Kv. Capacitor size is 10nF. I got approximately
12" streamers. Is this comparable to say, a smaller
desktop coil that uses the same level of power?