[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: Variacs Down Under



Original poster: "Peter Terren by way of Terry Fritz <teslalist-at-qwest-dot-net>" <pterren-at-iinet-dot-net.au>

Mathew
Thanks for the cheap Variac info for Aussie coilers. Alas, if I had known
this 3 weeks ago I would have saved $200.
Cheers
Peter
  http://members.iinet-dot-net.au/~pterren for variac in action

----- Original Message -----
From: "Tesla list" <tesla-at-pupman-dot-com>
To: <tesla-at-pupman-dot-com>
Sent: Tuesday, March 11, 2003 10:43 PM
Subject: RE: Variacs Down Under


 > Original poster: "Mark Snoswell by way of Terry Fritz
<teslalist-at-qwest-dot-net>" <mark-at-cgCharacter-dot-com>
 >
 > There's only three left now :)  ... I would have ordered 2 but then my
 > wife would have put me on the verandah ;)
 >
 > Mark
 >
 > -----------------------------------------------------------------
 > Dr Mark Snoswell.
 > Creator & Head Dude                        www.cgCharacter-dot-com
 > Contributing Editor Design Graphics.  www.designgraphics-dot-com.au
 > Aldgate Valley Rd, Mylor. Adelaide 5153, Australia
 > -----------------------------------------------------------------
 >
 >
 >
 > -----Original Message-----
 > From: Tesla list [mailto:tesla-at-pupman-dot-com]
 > Sent: Tuesday, 11 March 2003 3:22 PM
 > To: tesla-at-pupman-dot-com
 > Subject: Variacs Down Under
 >
 >
 > Original poster: "Matthew Smith by way of Terry Fritz
 > <teslalist-at-qwest-dot-net>" <matt-at-kbc-dot-net.au>
 >
 > Hi
 >
 > For any Aussie coilers looking for a bargain Variac, er, variable
 > autotransformer, Oatley electronics are currently listing a quantity of
 > four 15A/240V Rheotor units at $195 each.
 >
 > I recently acquired a similar unit through an auction at a mere $100
 > more
 > (grumble, grumble).  Considering that Farnell/RS list 6A/240V units for
 > $800, I still consider this to be quite a bargain.
 >
 > Still doesn't compare with my hundredweight of 25A genuine Variac - had
 > to
 > weld a frame together over the weekend to hold the rack mount unit in a
 > vertical position; now I just need to fit the wheels so I can move the
 > thing off the verandah where my wife keeps tripping over it ;-)
 >
 > Cheers
 >
 > M
 >
 > Ref: http://www.oatleyelectronics-dot-com/bcorner2.html
 >
 > --
 > Matthew Smith
 > IT Consultant - KBC, South Australia
 > KBC Web Site    http://www.kbc-dot-net.au
 > PGP Public Key  http://gpg.mss.cx
 >
 >
 >
 >
 >