Re: PlasmaSonic SSTC II Completed Design and Updated Schematics

["Tesla list" <tesla-at-pupman-dot-com>]

Original poster: "Dr. Resonance" <resonance-at-jvlnet-dot-com> 


Dan --- if it will help put me on the list for one.  Please advise again of
the price w/shipping.

Dr. Resonance

 > I've completed my PlasmaSonic II Design and have posted the schematics and
 > parts list.  I also built up a prototype VU Meter and the test was
 > successful.  Should be a great improvement for the SSTC.
 >
 > Full-Bridge Power Supply Schematic
 > http://www.spacecatlighting-dot-com/datasheets/sc2038schematic_sheet1.pdf
 >
 > SwitchMode Controller (SMPS) Schematic
 > http://www.spacecatlighting-dot-com/datasheets/sc2038schematic_sheet2.pdf
 >
 > Low Voltage Power Supply and VU Meter Schematic
 > http://www.spacecatlighting-dot-com/datasheets/sc2038schematic_sheet3.pdf
 >
 > PlasmaSonic II Parts List
 > http://www.spacecatlighting-dot-com/datasheets/sc2038_partslist.pdf
 >
 >
 > If you have ordered yet, please do so as soon as possible.  I'm looking to
 > place the order next week and need a minimum of 20 boards to do so.
 > If you already have an original PlasmaSonic Board, I would urge you to get
a
 > second one.  Running the PlasmaSonic system in stereo is something that
 > has to be heard to be appreciated.  Its absolutely stunning.  This will be
 > the last PlasmaSonic board design, so after these boards are gone, thats
it.
 > Be
 > sure to get one while you can!!!
 >
 > Dan
 > dhmccauley-at-spacecatlighting-dot-com
 >
 >
 >