[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

RE: PlasmaSonic SSTC II Completed Design and Updated Schematics



Original poster: "David Trimmell" <humanb-at-chaoticuniverse-dot-com> 

Dan, I have one question. Are these boards providing the support for the
10 MHz operation? I know you are still updating things, but just too
clarify, as your site still says 1-500KHz.

Thanks,

David Trimmell

-----Original Message-----
From: Tesla list [mailto:tesla-at-pupman-dot-com]
Sent: Wednesday, September 24, 2003 5:32 PM
To: tesla-at-pupman-dot-com
Subject: PlasmaSonic SSTC II Completed Design and Updated Schematics

Original poster: dhmccauley-at-spacecatlighting-dot-com

I've completed my PlasmaSonic II Design and have posted the schematics
and
parts list.  I also built up a prototype VU Meter and the test was
successful.  Should be a great improvement for the SSTC.

 >snip<<<<<,