Re: My new secondary

["Tesla list" <tesla-at-pupman-dot-com>]

Original poster: "Mark W. Stolz" <mark_w_stolz-at-hotmail-dot-com> 

32AWG will work fine for a secondary.  I managed to get almost 4' out of a 
2.5" diameter secondary wound with it.  Of course I was feeding it almost 
4kVA when it melted. :-)  It worked so well I made another one.  You can 
see pictures of both on my site.
http://users2.ev1-dot-net/~nmyreality/tesla/tesla.htm

Mark Stolz
Houston, TX
http://teslacoils4christ-dot-org/


>Original poster: The MCP <ejkeever-at-comcast-dot-net>
<snip>
>of 800+ were lost. The only other thing I have enough of is that 32 gauge
>magnet wire, and it would have been *far* too many turns (Not to mention far
>too many years of my life to wind :).

_