[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: How to make a "good" copper tubing clamp

To: tesla-at-pupman-dot-com
Subject: Re: How to make a "good" copper tubing clamp
From: "Tesla list" <tesla-at-pupman-dot-com>
Date: Thu, 05 Aug 2004 12:27:22 -0600
Resent-Date: Thu, 5 Aug 2004 12:33:13 -0600
Resent-From: tesla-at-pupman-dot-com
Resent-Message-ID: <2wF0tC.A.kiD.N0nEBB-at-poodle>
Resent-Sender: tesla-request-at-pupman-dot-com

Original poster: "dave pierson" <davep-at-quik-dot-com> 

I'm Assuming adjustability is desired?
Random, untested, thought:
   Smallish Stainless Steel Hose clamp?
   Seems it would be:
       adjustable?
        Uniform inward radial force applied?
          (minimizing tube crushing...)
         Some Stainless can be soldered to, with care, and the right flux...

    best
      dwp

Prev by Date: Re: How to make a "good" copper tubing clamp
Next by Date: Re: New Maxwell on ebay
Prev by thread: Re: How to make a "good" copper tubing clamp
Next by thread: Re: How to make a "good" copper tubing clamp
Index(es):
- Date
- Thread