[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: Measuring MMCs



Original poster: "Bart Anderson" <tesla111-at-sbcglobal-dot-net> 

Hi John,

Tesla list wrote:

>Original poster: "John" <fireba8104-at-yahoo-dot-com>
>Hello Steve and Bart,
>Same situation here. 50nF calculated and 50nF measured. I have 10 meg ohm 
>across each cap(also carbon).
>Cheers,
>John
>P.S Bart, why are your caps yellow? Camera? U.V. damage?

Nope, spar varnish. I globbed it on a pcb design for added protection prior 
to their use in the shown arrangement. Needless to say, the varnish ended 
up all over the caps - unintentionally.

Take care,
Bart