Re: Help! I killed my NST!

["Tesla list" <tesla-at-pupman-dot-com>]

Original poster: "Jim Mitchell" <electrontube-at-sbcglobal-dot-net> 

Nah, the insulation on the windings is just fine.  I switched over to
kerosene because the acetone wasn't doing anything to the tar.  now the
kerosene on the other hand....  I rigged up a little bubbler using my air
compressor set on like 2psi  hopefully the tar will be gone by tomorrow,
then I can build my " pole piglet "

Regards - Jim Mitchell
----- Original Message -----
From: "Tesla list" <tesla-at-pupman-dot-com>
To: <tesla-at-pupman-dot-com>
Sent: Sunday, February 29, 2004 1:09 AM
Subject: Re: Help! I killed my NST!


 > Original poster: "Gerry Reynolds" <gerryreynolds-at-earthlink-dot-net>
 >
 > Hi Jim,
 >
 > Acetone is pretty nasty stuff and not knowing better, I would be concerned
 > about it desolving the winding insulation.
 >
 > Gerry R
 >
 >
 >  > Original poster: "Jim Mitchell" <electrontube-at-sbcglobal-dot-net>
 >  >
 >  >> Now I have the whole thing dipped in acetone to dissolve the rest of
the
 >  > asphalt.  >
 >
 >