Re: Terry Gap vs. TCBOR...

["Tesla list" <tesla-at-pupman-dot-com>]

Original poster: Ed Phillips <evp-at-pacbell-dot-net> 

Tesla list wrote:
 >
 > Original poster: Ed Phillips <evp-at-pacbell-dot-net>
 >
 > Tesla list wrote:
 >  >
 >  > Original poster: "Gerry Reynolds" <gerryreynolds-at-earthlink-dot-net>
 >  >
 >  > Hi Brett,
 >  >
 >  > Now that you got the Fritz gap epoxied (I know, great timing), it 
would be
 >  > great to compare the Fritz and TCBOR gaps two ways.
 >  >
 >  > 1.  With the total gap spacing the same for each type .
 >  >
 >  > 2.  With the gap setting on one set so the breakdown voltage is the 
same as
 >  > for the other.   I think this would be the best comparison of 
performance.
 >  >
 >  > I guess I'm thinking that since the geometry is not the same (different
 >  > diameters),  the breakdown voltage for a given gap setting may not be the
 >  > same.
 >  >
 >  > Gerry R
 >
 >         How much are

	AIR AIR AIR AIR AIR AIR !!!!!!!!!!!

 >  on this gap?  They do get awfully hot when running.....
 >
 > Ed

Ed