Re: Sync Motors Herbach-dot-com

["Tesla list" <tesla-at-pupman-dot-com>]

Original poster: "Steve Ward" <steve.ward-at-gmail-dot-com> 

Ive built a SRSG from the synch motor sold at herbach.  It worked
great 100% of the time, i never had to flip it on/off to have it
reset.  I believe these are true synch motors and not hysteresis type.

Steve


On Sat, 06 Nov 2004 21:05:15 -0700, Tesla list <tesla-at-pupman-dot-com> wrote:
 > Original poster: "Dr. Resonance" <resonance-at-jvlnet-dot-com>
 >
 > Just remember these are not hysteresis sync type motors.  They sync, but not
 > always in the same position every time you turn them on.  Sometimes you have
 > to flick the power switch on and off a few times to get them to sync at the
 > peak as your RSG electrodes line up.
 >
 > Dr. Resonance
 >
 >
 >
 > >
 > > I got my sync motor from Herbach-dot-com today and it is really nice...
 > > almost as big around as a quart of oil ( for those old enuf to remember
 > the
 > > quart of oil in the papercan)  and about 3/4 as tall    ( 3 3/4 dia X 3
 > 1/2
 > > tall not counting shaft)
 > >
 > > runs a dead solid 1800 rpm    for an amazing 8.00$
 > >
 > > makes a wonderful Sync Gap for NST application in the helicopter or prop
 > > style rotor.
 > >
 > > after I get the additional parts produced ( mount rotor hub etc) I will
 > try
 > > to get a few pix up ...   along with the strobe stuff too...  sorry I
 > > lagged an that part   been busy...
 > >
 > > Scot D
 > >
 > >
 > >
 > >
 > >
 > >
 >
 >