[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

need a ready made coil?



Original poster: dgoodfellow-at-highstream-dot-net 

If anyone has not already seen it, I have a nearly complete coil offered on 
ebay,  with a big fat electrical hose, proper toroid, ganged variacs, and a 
19,000 volt 4.2 kva non shunted transformer. Item number: 6120109635. Tell 
your friends! Get all the scrounged components in one stop and forget the 
years of lucky hamfest buys and junkyard searches. Of coarse, some of us 
live near better junkyards than others. I am not one of the fortunate ones 
with a great "Yard" nearby. The hurricanes did not get at this coil, but 
work has been slightly reduced from the close calls. Of coarse Dan is 
holding the carrot of solid state coils in front of us, so maybe it is time 
to change directions. I remember being at Richard Hulls Teslathon back in 
1996, where we were all spellbound by a 5 gallon paint bucket wound with 30 
ga magnet wire, which was base driven from transistor components, and it 
put out a 3/4" spark from a thumbtack, if it was properly tuned.
How things have changed since then!!!

Dave Goodfellow