[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: Hey Terry

To: tesla-at-pupman-dot-com
Subject: Re: Hey Terry
From: "Tesla list" <tesla-at-pupman-dot-com>
Date: Tue, 31 Aug 2004 12:16:58 -0600
In-Reply-To: <3D74B6131C67CA48B6AD345B21CCA8BF02690C8C-at-emss04m19.us.lmco-dot-com>
References: <3D74B6131C67CA48B6AD345B21CCA8BF02690C8C-at-emss04m19.us.lmco-dot-com>
Resent-Date: Tue, 31 Aug 2004 12:18:10 -0600
Resent-From: tesla-at-pupman-dot-com
Resent-Message-ID: <bJgEk.A.DvC.PDMNBB-at-poodle>
Resent-Sender: tesla-request-at-pupman-dot-com

Original poster: Terry Fritz <teslalist-at-twfpowerelectronics-dot-com>

Hi Dan,

They are made by Sherline:

http://www.sherline-dot-com/

Very nice stuff that is very popular with hobbyists and people that don't 
have a lot of room.  I like mine a lot and use it all the time.  Highly 
recommended for smaller stuff!  They also have CNC stuff too.

Cheers,

         Terry

At 08:04 AM 8/31/2004, you wrote:
>Hey Terry,
>
>Awhile back, you had posted some pictures of a small tabletop milling
>machine (or CNC?) that had a digital read-out?
>
>What exactly was that?
>
>Thanks
>Dan

Prev by Date: Re: VTTC grid leak
Next by Date: Re: Flat-Copper-Strip Flat-Spiral-Primary Inductance Calc's?
Prev by thread: RE: SSTC : IGBT Short circuit protection
Next by thread: Re: Hey Terry
Index(es):
- Date
- Thread