[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: EPCOS HV Caps



Original poster: "Nele" <morfeus@xxxxxxxx>


----- Original Message -----
From: "Tesla list" <tesla@xxxxxxxxxx>
To: <tesla@xxxxxxxxxx>
Sent: Saturday, August 05, 2006 3:13
Subject: Re: EPCOS HV Caps


> Original poster: Mddeming@xxxxxxx
>
> In a message dated 8/4/06 7:23:48 P.M. Eastern Daylight Time,
> tesla@xxxxxxxxxx writes:
>
> Thank you for answering. I have just bought 130 of these. RAted at
47nf/2kV
> each. I am planing 10 strings in paraller, each with 15 caps. It should be
> enough. If they blow up, it is nothing but a bad cap. I am using
15kV/200mA
> transformer with 0-260VAC/15A variac regulation.
> Any picture would be helpful of course. Thanks!
>
> Regards,
> Nele
>
>
>
> Hi Nele,
>
>      How do you buy 130 caps and make 10 strings of 15 each? I could
> use some of this magic. ;^))
>
> Matt D.
>


Matt,

I am planing to buy some more and add to this 130. 15 per string would be
enough I suppose. 130 is enough for start working on the cap bank...

Regards,
Nele