[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

First Light

To: tesla@xxxxxxxxxx
Subject: First Light
From: "Tesla list" <tesla@xxxxxxxxxx>
Date: Wed, 05 Jul 2006 21:20:48 -0600
Delivered-to: testla@xxxxxxxxxx
Delivered-to: tesla@xxxxxxxxxx
Old-return-path: <vardan01@xxxxxxxxxxxxxxxxxxxxxxx>
Resent-date: Wed, 5 Jul 2006 21:04:43 -0600 (MDT)
Resent-from: tesla@xxxxxxxxxx
Resent-message-id: <AYYY74RWjMP.A.kpB.L3HrEB@chip1>
Resent-sender: tesla-request@xxxxxxxxxx

Original poster: "Rich & DJ" <rdj@xxxxxxxxxxxx>

Well I fired up my new coil for the first try and I am at the outermost point of my primary and I have 14" of spark. I will take alittle of my secondary, it has plenty of turns. I need to rebuild mysafety gap, it is not firing but the sparks are jumping the caps inthe safety setup, will use higher voltage caps. The caps worked withmy 15Kv 30 ma NST but not with this 13Kv 150ma transformer. Overallgap is at .200.Then I need to raise my safety ring, the attachment for thesecondary is arcing to the ring.

 It is good to smell a little ozone again.

Rich , from the middle of Missouri

Prev by Date: Re: Primary thanks
Next by Date: Iron transformer positioning under the primary experiment
Previous by thread: Re: Primary thanks
Next by thread: Iron transformer positioning under the primary experiment
Index(es):
- Date
- Thread