[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

RE: Tesla coil design plans



Original poster: "Lau, Gary" <Gary.Lau@xxxxxx>

These caps would be VERY suitable for use as bypass caps (2 in series
per side) in a Terry-style NST filter.  Now if you could just get such a
deal on MOV's!

Regards, Gary Lau
MA, USA

> Original poster: "Dr. Resonance" <resonance@xxxxxxxxxx>
>
>
> We expect these caps to be approx 90 cents each.
>
> Dr. Resonance
>
> >Original poster: "Dr. Resonance" <resonance@xxxxxxxxxx>
> >Recently someone on the list contacted me regarding plans for a nice
> >small TC design.  I don't recall who it was, but if you send me
> >another email off-list I will email you the design plans you
required.
> >Also, if anyone is building a HV multiplier of some type, flyback or
> >NST style, I have just entered an order for 5000 pcs of 1000 pF, 15
> >kV ceramic capacitors.  Contact me off-list after June 20th for
> >pricing information.  They will be quite inexpensive!
> >I have the plans for a unique NST voltage multiplier that uses
> >center-tapped style NST and X-ray or flyback transformers to produce
> >a single ended to ground output.  Nice for HV DC multipliers,
> >ion-ray guns, flyback HV multipliers, or any HV DC power supplies up
> >to 200 kV (especially using X-ray xmfrs).
> >Dr. Resonance