[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [TCML] Suggestions for a mini-TC?



 
An adjustable tap on insulated wire is very difficult to make.
 
Matt D.
 
 
In a message dated 12/24/07 10:48:33 P.M. Eastern Standard Time,  
goodman_jason@xxxxxxxxxxxxx writes:



Most large coils use exposed copper tube for the primary.   There  
should be no problem using insulated wire for this,  right?  I'm also  
considering a design in which the  high-voltage, high-current primary  
circuit is enclosed in a  (ventilated) plexiglas box, with the primary  
coil mounted to the  underside of the top of the box.







**************************************See AOL's top rated recipes 
(http://food.aol.com/top-rated-recipes?NCID=aoltop00030000000004)
_______________________________________________
Tesla mailing list
Tesla@xxxxxxxxxxxxxx
http://www.pupman.com/mailman/listinfo/tesla