[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: Terry filter

To: tesla@xxxxxxxxxx
Subject: Re: Terry filter
From: "Tesla list" <tesla@xxxxxxxxxx>
Date: Sun, 04 Feb 2007 16:13:10 -0700
Delivered-to: testla@xxxxxxxxxx
Delivered-to: tesla@xxxxxxxxxx
Old-return-path: <tcmlmod@xxxxxxxxxxxxx>
Resent-date: Sun, 4 Feb 2007 16:13:08 -0700 (MST)
Resent-from: tesla@xxxxxxxxxx
Resent-message-id: <O_kARuDvFqO.A.8xF.EimxFB@chip1>
Resent-sender: tesla-request@xxxxxxxxxx

Original poster: Mddeming@xxxxxxxIn a message dated 2/4/07 12:36:27 A.M. Eastern Standard Time,tesla@xxxxxxxxxx writes:

Original poster: "Todd Reeve" <todd.reeve@xxxxxxxxxxxx>

I am going to add a Terry Filter to my coil and I was wondering if
someone could give me a ballpark width for the 2 safety gaps.  I am
running a 15kV 60 mA NST.

Thanks.


Hi Todd,

    Try 4mm Max each side of the ground terminal.

Matt D.

Prev by Date: Re: Terry filter
Next by Date: RE: static spark gaps
Previous by thread: Re: Terry filter
Next by thread: Re: Terry filter
Index(es):
- Date
- Thread