[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: MMC's needed (fwd)



---------- Forwarded message ----------
Date: Wed, 10 Oct 2007 08:58:30 -0600
From: resonance <resonance@xxxxxxxxxxxx>
To: Tesla list <tesla@xxxxxxxxxx>
Subject: Re: MMC's needed (fwd)



Resonance Research Corp. stocks them.  contact me off-list.

Dr. Resonance

Resonance Research Corp.
www.resonanceresearch.com


----- Original Message ----- 
From: "Tesla list" <tesla@xxxxxxxxxx>
To: <tesla@xxxxxxxxxx>
Sent: Wednesday, October 10, 2007 8:03 AM
Subject: MMC's needed (fwd)


>
> ---------- Forwarded message ----------
> Date: Tue, 9 Oct 2007 11:40:43 -0700 (GMT-07:00)
> From: penny831@xxxxxxxxxxxxx
> To: Tesla list <tesla@xxxxxxxxxx>, tesla@xxxxxxxxxx
> Subject: MMC's needed
>
> Hello everyone,
>  Well, I'm just finishing up my bank of capacitors but I'm 20 short. :-( 
> Does anyone have a source for another 20 of the 942's?, not to mention 
> bleeder resistors.
>
> Tony
>
> -----Original Message-----
>>From: Tesla list <tesla@xxxxxxxxxx>
>>Sent: Oct 9, 2007 5:48 AM
>>To: tesla@xxxxxxxxxx
>>Subject: Bottle Caps - Was Re: dual mot tc (fwd)
>>
>>
>>---------- Forwarded message ----------
>>Date: Tue, 9 Oct 2007 03:23:09 -0700 (PDT)
>>From: Yurtle Turtle <yurtle_t@xxxxxxxxx>
>>To: Tesla list <tesla@xxxxxxxxxx>
>>Subject: Bottle Caps - Was Re: dual mot tc (fwd)
>>
>>I've never done a side by side test, so take this with
>>a grain of salt. Greg's big cap bank used Miller
>>Genuine Draft bottles, which are clear. I've tried
>>both clear and brown, though not in a controlled
>>experiment. Greg has run his with pig power, while
>>mine was always limited to NST's. It seemed to me that
>>the clear bottles held up better than the brown ones.
>>I had numerous bottles punctured with my first 3" and
>>4" coils, using a lowly 15/30.
>>
>>One other think to consider is to try and avoid reused
>>bottles. I don't know if they're still aropund, but in
>>many states, cases of bottles carried a deposit, and
>>were cleaned and reused. The bottles were used again
>>and again, making the likelihood of them having been
>>banged around pretty high.
>>
>>Good luck
>>Adam
>>
>>--- Tesla list <tesla@xxxxxxxxxx> wrote:
>>
>>>
>>> ---------- Forwarded message ----------
>>> Date: Mon, 8 Oct 2007 11:43:02 -0700 (PDT)
>>> From: G Hunter <dogbrain_39560@xxxxxxxxx>
>>> To: Tesla list <tesla@xxxxxxxxxx>
>>> Subject: Re: dual mot tc (fwd)
>>>
>>> No problem.  Glass bottles and NSTs go together
>>> well.
>>> 12oz (355ml) beer bottles are good for 750-900pF
>>> each.
>>>  A 6-pack is worth roughly 5nF.  A 12-pack will get
>>> you 10nF.  These can stand up to any NST, including
>>> the 15kv units.  For a "dry" cap, try wrapping the
>>> bottles in kitchen foil.  You can stick it on with
>>> spray glue.  Just roll the bottle up in foil, then
>>> smooth it down using the back of a big spoon.
>>>
>>> I've assembled caps like this as big as 80nF
>>>
>>> http://hot-streamer.com/greg/bottle.htm
>>>
>>> and gotten satisfactory performance from them.  They
>>> are not in the same league as a commercial plastic
>>> film pulse cap, but they are very inexpensive.
>>>
>>> Cheers,
>>>
>>> Greg
>>>
>>
>>
>>
>>
>>____________________________________________________________________________________
>>Be a better Heartthrob. Get better relationship answers from someone who 
>>knows. Yahoo! Answers - Check it out.
>>http://answers.yahoo.com/dir/?link=list&sid=396545433
>>
>>
>>
>
>
>
>