[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [TCML] Primary Tap connector



Hi Bart,

Nice primary and very clean attachment.    snagged!

Question, How are the "turns" attached to the supports? It appears they might snap in, or is there another clip or something?

The whole primary looks very neat!

Thanx,   steve - seattle

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Hi Phil,

Yep, I did something similar. I used 1/2" brass rod stock (left-over from old spark gap). Works great.
http://www.classictesla.com/photos/ba45/s2749.jpg

1 screw to clamp the two halves together. 1 screw for the wire.

Take care,
Bart

_______________________________________________
Tesla mailing list
Tesla@xxxxxxxxxxxxxx
http://www.pupman.com/mailman/listinfo/tesla