Re: [TCML] pole pig ballasting

[FIFTYGUY@xxxxxxx]

In a message dated 7/16/08 3:12:29 P.M. Eastern Daylight Time,  
resonance@xxxxxxxxxxxx writes:

>Use very large wire on the reactor as the peak currents are higher  than the

>average.  I use 8 AWG at 30-40 Amps and 4 AWG above 50-60  Amps.


    Don't forget you can use paralleled windings of  smaller gauge wires 
instead of single windings of big wire. Much easier to  obtain, and much easier to 
wind.

 
-Phil LaBudde
Center for the Advanced Study of Ballistic  Improbabilities



**************Get the scoop on last night's hottest shows and the live music 
scene in your area - Check out TourTracker.com!      
(http://www.tourtracker.com?NCID=aolmus00050000000112)
_______________________________________________
Tesla mailing list
Tesla@xxxxxxxxxxxxxx
http://www.pupman.com/mailman/listinfo/tesla