[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [TCML] ANother tube coil question



Hi David,

I don't know what it costs.  I think some folks use
thinner litz wires, and simply parallel a great number
of them to create a thick enough wire.  They
create a sort of bundle that way.  I'm not sure
if Ed made his that way.  Theoretically litz wire
could be home-made by paralleling many thin insulated
regular enameled wires.  If the wire is the Soldeze
type then enough heat would remove the insulation
at the ends so they can be all soldered together at
the ends.  I think some folks dip the ends into a pot
of molten solder to solder the ends.  Seems like a big
job though.  I think they use something like 36 or 38
awg wire for the individual insulated strands for
standard litz wire.

John
----------


-----Original Message-----
From: David Rieben <drieben@xxxxxxxxxxx>
To: Tesla Coil Mailing List <tesla@xxxxxxxxxx>
Sent: Thu, 11 Sep 2008 7:06 pm
Subject: Re: [TCML] ANother tube coil question



Hi John,

Thanks for your response. We both saw Ed Wingate's
big tube coil just a few weeks ago ;^) I do recall him
mentioning the Litz wire primary, now that you mention
it. Isn't Litz wire very expen$ive, though? It doesn't seem
to show up that often on eBay. I can only imagine how
much 50 ft. of #8 Litz wire would set my wallet back!

--
David Rieben

-------------- Original message --------------
From: futuret@xxxxxxx


David,

Yes VTTC primaries tend to run hot. Ed Wingate now
uses litz wire on his primary, and he said it runs
a lot cooler after making the change to litz.

I usually use 12awg solid or stranded wire for
sparks up to 36" long. I don't keep my runs all
that long, so it works OK. It's a good idea to
measure the input power and compare that
to the obtained output spark length. It should
take about 2400 watts to obtain 24" sparks.

I use the formula:

spark length (inches) = 0.5*sqrt input power (watts)

for VTTCs

Cheers,
John
----------------

_______________________________________________
Tesla mailing list
Tesla@xxxxxxxxxxxxxx
http://www.pupman.com/mailman/listinfo/tesla