[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [TCML] op amp wiring



If you could provide a schematic of the desired project using the op-amp, many of us could provide more information regarding power supply connections etc...

Skip

At 02:17 PM 1/14/2009, you wrote:
Hey guys,
     I am in need of some assistance, I am doing an experiment with
flyback drivers, and the circuit I designed uses a Op-amp in a
comparator configuration.  The only problem is I know nothing about
actually wiring an Op-amp except for the extreme basics (inverting
pin, non-inverting pin, output) which I learned in school.  I do not
know how to connect it to the power supply, if I need negative
voltage, what the "offset" pins are for, what Vcc or Vss is, etc.  Any
help would be appreciated, there are 8 pins and I only know for sure
what 3 of them do, thanks.

Scott Bogard
_______________________________________________
Tesla mailing list
Tesla@xxxxxxxxxxxxxx
http://www.pupman.com/mailman/listinfo/tesla

_______________________________________________
Tesla mailing list
Tesla@xxxxxxxxxxxxxx
http://www.pupman.com/mailman/listinfo/tesla