[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: Re: [TCML] Solid state efficiency, was: mini Tesla coil specs



Bert (& all)-

Glad to hear that my hunch is correct. Regarding band-to-bang spark-growth, I recall this from when my coil was working: I could produce sparks at rep-rates from 1 at a time to upwards of 20-30/s or so, and burst-widths from about 8 cycles (I controlled it with a cycle-counting IC) up to 5 ms-worth or thereabouts, at ~120 KHz and from a 6"x24" Landergren toroid. I didn't closely look for it, but I don't recall seeing much difference in the overall spark length, for any of those settings.

KCH

Bert Hickman wrote:
<div class="moz-text-flowed" style="font-family: -moz-fixed">Dex and Ken,

The physics of spark propagation is markedly different for positive versus negative sparks (in a divergent E-field, such as around a TC topload). All other things being the same, positive sparks propagate more "efficiently" in air. Once initial breakout occurs, a positive-going high voltage pulse will travel further than a similar negative-going pulse. In a diverging E-field, a positive spark will bridge a gap at a lower voltage than a negative spark. This is still true, even though negative corona will "break out" at a lower voltage than positive corona. These "polarity effects" are well known by professional high voltage workers and engineers.

Ken is indeed correct - there is an "optimal" voltage risetime that leads to maximum propagation "efficiency". One noted researcher, Yuri P. Raizer, has developed a relationship for the optimal voltage risetime for a positive spark to travel a distance of L meters ("Gas Discharge Physics", page 362):

T(optimal risetime) = 50*L (in microseconds)

Unfortunately, although the above relationship appears to work quite well for monopolar impulses from Marx Generators, it's not at all clear how (or even if) the above relationship can be adopted to the complex waveforms of Tesla Coils. Using either the RF waveform or envelope leads to relatively low operating frequencies for typical coupling coefficients.

We also know that the longest TC sparks are not obtained during single
single events (bangs), but instead via bang-to-bang growth. Newer sparks build on the heated channels of their predecessors when the break rate is sufficiently high (>70-80 BPS). This suggests that we might try combining polarity effect and bang-to-bang growth by polarizing the system so that the highest voltage peak after ring-up is always of positive polarity. The positive peaks will provide the longest "reach" during propagation. This should be simple to implement through suitable coupling coefficient and phasing for SSTC, DRSSTC, or DC-resonant SGTC systems, and should cause optimal spark propagation for a given input power, frequency, and break rate.

BTW, an excellent book (also by Raizer), "Spark Discharge", 1991, CRC Press, ISBN 0849328683 can currently be obtained for around $38 or so on Amazon and other large book sellers. This book was originally in the $130 range. It is technical, but quite readable considering the complexity of the subject. Any serious spark researcher should have this title in their library.

Bert


_______________________________________________
Tesla mailing list
Tesla@xxxxxxxxxx
http://www.pupman.com/mailman/listinfo/tesla