[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

RE: [TCML] Coil v1.1 w/SRSG video



On a side-note, you may want to consider lowering the height of your strike rail.
I noticed in the video you have a lot of toroid to strike rail arcs, and I highly
Suspect that if you drop that down to like 1 to 2 inches or so over the height of
The primary coil, those particular arcs diminish in quantity, and let more fly
Into the air from the toroid...  just a thought.
---
Reverend Fuzzy
Pastor, MSB Ministries
Hattiesburg, MS

> -----Original Message-----
> From: tesla-bounces@xxxxxxxxxx [mailto:tesla-bounces@xxxxxxxxxx] On Behalf Of Joe Mastroianni
> Sent: July 04, 2010 10:00 PM
> To: Tesla Coil Mailing List
> Subject: [TCML] Coil v1.1 w/SRSG video
> 
> Here's a video of the coil operating until it triggers the garage door opener.
> It's at slightly less than 2/3 power.  It's getting to the point where it makes me a little nervous to
> run at full power, which I suppose is a stage each coiler hits in his own time.  At the minimum I need
> to separate the resonator from the power supply as I'm getting the feeling the guts of the thing are
> going to suffer a strike if I keep running it this way.  Though, when I started my arcs were barely 4"
> long.
> 
> Come a long way since first light -
> 
> http://yfrog.com/bhcoil11z
> 
> Cheers,
> Joe_______________________________________________
> Tesla mailing list
> Tesla@xxxxxxxxxx
> http://www.pupman.com/mailman/listinfo/tesla

_______________________________________________
Tesla mailing list
Tesla@xxxxxxxxxx
http://www.pupman.com/mailman/listinfo/tesla