[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [TCML] Primary support "advance"



S&JY wrote:
Jon, I did your second method:  "making all six of the supports
identical, and varying each support's location on the plywood "donut"
supporting the primary and supports", and recommend you do likewise
since it simplifies construction.  A stack of 4 business cards is
very close to 1/24 inch thick.

Ah, thanks Steve, I was wondering what I would be using for a shim, that gives me a start before I wander about the house with my calipers!

Jon
_______________________________________________
Tesla mailing list
Tesla@xxxxxxxxxx
http://www.pupman.com/mailman/listinfo/tesla