[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [TCML] Staccato controller how much current needed?



Stefan,

And if you want to be able to shut off the staccato to be able to obtain
the full 60pps, the circuit is here.  (I added back the bypass switch and
10k resistor to the schematic).

 http://sites.google.com/site/jfuturet/home/staccatto-controller


Cheers,
John


     

 

 


 

 

-----Original Message-----
From: Henry Hallam <henry@xxxxxxxxxxxxxxxx>
To: Tesla Coil Mailing List <tesla@xxxxxxxxxx>
Sent: Mon, Apr 11, 2011 5:43 pm
Subject: Re: [TCML] Staccato controller how much current needed?


800mA should be more than enough.



On Mon, Apr 11, 2011 at 11:54 AM, Teslalabor <teslalabor@xxxxxxxxxxx> wrote:

> Hi,

> I have a short question. How much mA does the staccato circuit

> (http://stevehv.4hv.org/staccato.htm) need? I have a 12V / 800mA

> transformer, is this enough to power the circuit?

>

> Regards

> Stefan

> _______________________________________________

> Tesla mailing list

> Tesla@xxxxxxxxxx

> http://www.pupman.com/mailman/listinfo/tesla

>

_______________________________________________

Tesla mailing list

Tesla@xxxxxxxxxx

http://www.pupman.com/mailman/listinfo/tesla


 
_______________________________________________
Tesla mailing list
Tesla@xxxxxxxxxx
http://www.pupman.com/mailman/listinfo/tesla