Re: [TCML] VTTC, 1.75" x 6" spun aluminum toroids

[Futuret <futuret@xxxxxxx>]

Hi Bart,

I'm sure list members would enjoy hearing about your experiences in
building, and tuning your VTTC, and the results, and your thoughts about
it all.  I certainly would like to hear about it.  

Yes the younger generation of TC builders have certainly made impressive
advances in TC technology.

Bart your JAVATC is the gold standard for TC design work !  

Merry Christmas and Happy New Year to all !

Cheers,
John  

 

 

 

-----Original Message-----
From: Bart B. Anderson <bartb@xxxxxxxxxxxxxxxx>
To: Tesla Coil Mailing List <tesla@xxxxxxxxxx>
Sent: Fri, Dec 23, 2011 7:27 am
Subject: Re: [TCML] 1.75" x 6" spun aluminum toroids available


Hey John, I bought a toroid from you not too long ago for VTTC. Worked 
out perfect as I knew it would! You da man!
Just wanted to wish everyone a Merry Christmas and Safe New Years....

Be good everyone...
I hope Javatc is working for you all.. I'm doing DR coils these days and 
stuff!
Still coiling and attempting to keep up with the young bucks (in vain)....

Take care,
Bart B. Anderson



On 12/22/2011 10:42 AM, Futuret wrote:
> Hello all,
>
> I have 1.75" x 6" spun aluminum toroids available for
> $72 each.  Free shipping within the USA, so it's the
> total cost.  Spin polish finish, 1/4" center mounting hole.
> Quantities limited.  Suitable for small spark gap TC's and
> for VTTC's, as corona rings/shields, marx generators, etc.
> Spun toroids are the "gold standard" for topload excellence.
> I use the same<  FutureT@xxxxxxx>  email address for PayPal.
>
> http://sites.google.com/site/jfuturet/home/1-x-4-spun-aluminum-toroid
>
> Thanks,
> John


 
_______________________________________________
Tesla mailing list
Tesla@xxxxxxxxxx
http://www.pupman.com/mailman/listinfo/tesla