[TCML] RE: RMS Voltage

[vatercox@xxxxxxx]

Why is the need to calculate? The RMS voltage of a transformer is 
USUALLY the input or output voltage stated on the rating plate -unless 
indicated otherwise, e.g if the rating plate states the PEAK voltage- 
but this is much less common.

I do in fact  have an OBIT that has BOTH RMS and peak ratings printed 
on it as follows:-

Sec: 2 x 4kV =RMS (8kV centre-tapped)
Ampl. 11kV = PEAK
as 8kV  x 1.414 =11kV approx.

Hope this helps,
 J.F Vater-Cox
_______________________________________________
Tesla mailing list
Tesla@xxxxxxxxxx
http://www.pupman.com/mailman/listinfo/tesla