[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[TCML] Neon GFI question

To: tesla list <tesla@xxxxxxxxxx>
Subject: [TCML] Neon GFI question
From: jhowson4@xxxxxxxxxxx
Date: Fri, 25 Mar 2011 15:36:47 +0000 (UTC)
Delivered-to: teslaarchive@xxxxxxxxxx
Delivered-to: tesla@xxxxxxxxxx
List-archive: <http://www.pupman.com/pipermail/tesla>
List-help: <mailto:tesla-request@pupman.com?subject=help>
List-id: Tesla Coil Mailing List <tesla.pupman.com>
List-post: <mailto:tesla@pupman.com>
List-subscribe: <http://www.pupman.com/mailman/listinfo/tesla>, <mailto:tesla-request@pupman.com?subject=subscribe>
List-unsubscribe: <http://www.pupman.com/mailman/listinfo/tesla>, <mailto:tesla-request@pupman.com?subject=unsubscribe>
Reply-to: Tesla Coil Mailing List <tesla@xxxxxxxxxx>
Sender: tesla-bounces@xxxxxxxxxx

A quick question, 
I have a small Neon with the GFI encapsulated in epoxy resin and I was essentially wondering if the reset switch could be shorted to allow for continuous operation. 
My feeling on this is probably not, but I just wanted to check. 


Thanks, 
John "Jay" Howson IV 


"Why thank you, I will be happy to take those electrons off you hands." 

_______________________________________________
Tesla mailing list
Tesla@xxxxxxxxxx
http://www.pupman.com/mailman/listinfo/tesla

Follow-Ups:
- Re: [TCML] Neon GFI question
  - From: Joe Mastroianni

Prev by Date: [TCML] Circuit Measures Inductance and Capacitance
Next by Date: Re: [TCML] Re: MOT Shunts
Previous by thread: [TCML] Circuit Measures Inductance and Capacitance
Next by thread: Re: [TCML] Neon GFI question
Index(es):
- Date
- Thread