[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [TCML] Primary/Sec. Frequency



Phil,

I must have gotten in a hurry. However, I did have to run the program several times to get the Topload info to appear.

Attached is my most recent attempt, with everything filled in.

Thanks for your help,

Tim Flood



--------------------------------------------------
From: "Phil Tuck" <phil@xxxxxxxxxxx>
Sent: Wednesday, June 19, 2013 5:43 PM
To: "'Tesla Coil Mailing List'" <tesla@xxxxxxxxxx>
Subject: RE: [TCML] Primary/Sec. Frequency

Tim,

You have left out the toroid data, so the frequency calculated is without a
toroid fitted. So you need to add your toroid data firstly.

You have then left out your primary cap size, so the program gives you a
frequency of zero. So add the cap size in as well.

Go here http://www.classictesla.com/java/javatc/javatc.html  and use the
latest online version.
On the top line, far right, click "Load sample Coil". This will fill in all the boxes with the input data coming from measurements of an old coil that
Bart built once.

Then go through and change the parts that apply to you. The second section
down for 'Ground Plane' etc, you can leave the existing for now.
Then post the result back here again

Regards
Phil Tuck

www.hvtesla.com
tp://www.pupman.com/mailman/listinfo/tesla
_______________________________________________
Tesla mailing list
Tesla@xxxxxxxxxx
http://www.pupman.com/mailman/listinfo/tesla