[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [TCML] Matt tesla



Or some of your Primary Capacitance is not functioning, missing, or otherwise not working. This would drive your Primary Frequency way up putting your coil way out of tune...

Sounds like you need to:

1-Calculate the resonate frequency of your Secondary and Primary circuits...

2-Verify your Primary Capacitance...

3-Grid dip your coil and see what frequency the primary and secondary are actually oscillating at...

4-Based on your calculations and measurements, reconfigure the coil as necessary to get it in tune...

Hope this helps,
BrianB


On May 17, 2013, at 6:36 AM, Jim Lux <jimlux@xxxxxxxxxxxxx> wrote:

> On 5/17/13 5:41 AM, Matthewhebb wrote:
>> So what your saying is the old coils system just wont work with this its to far off to even use for testing
>> 
>> Sent from Samsung Mobile
>> 
>>  Carl Noggle <cn@xxxxx> wrote:
>> 
>> Or, your primary resonant frequency could be way too high and you need about
>> 4x the primary capacitance.
>> 
>> ---Carl
> 
> could be.. Have you run a calculation of the expected resonant frequency of your old and new systems?
> 
> 
> _______________________________________________
> Tesla mailing list
> Tesla@xxxxxxxxxx
> http://www.pupman.com/mailman/listinfo/tesla
_______________________________________________
Tesla mailing list
Tesla@xxxxxxxxxx
http://www.pupman.com/mailman/listinfo/tesla