[Home][2015 Index] Re: [TCML] Off topic table saw question. [Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [TCML] Off topic table saw question.



The slots are allowing the misalignment, you have to force it into alignment
while slooowly snugging bolts. POS Chinese crap. Yeah, I have one also!
James 

-----Original Message-----
From: Tesla [mailto:tesla-bounces@xxxxxxxxxx] On Behalf Of Matthew Sweeney
Sent: Thursday, September 03, 2015 00:32
To: tesla@xxxxxxxxxx
Subject: [TCML] Off topic table saw question.

I'm building upto 14" diameter VDG for free (for any educational institution
or retail not for sale demo only, or otherwise convincable persons of
insanity) + mayetials/shipping but have hit a snag:

I aquired a new job site table saw Bosch 4100 something with mount its great
for price but I'm having problems with miter alighment. Out of box the blade
was of 1/8 inch front to back which is simply unacceptable. I've followed
the Instructions to align this but when I retighten the bolts it reverts to
its old cappy 1/8 inch Out of alignment.

So my question is, should I give up return the product and double up for a
proper cabinet saw, or persist and widen those factory slots to get a
perfect measure

We are taking $600 for a fine portable jobsite saw vs $1500+ for a proper
cabinet saw. I need at the very least 1/32 inch ignment so ... Any experts
have an opinion?
_______________________________________________
Tesla mailing list
Tesla@xxxxxxxxxx
http://www.pupman.com/mailman/listinfo/tesla

_______________________________________________
Tesla mailing list
Tesla@xxxxxxxxxx
http://www.pupman.com/mailman/listinfo/tesla