I finally got my SRSG online tonight. To my dismay I started blowing 30 amp
fuses in my supply variac. I am hoping the list can help me figure out why
this is happening...we have guests coming over for Thanksgiving and they
are expecting a show!!! LOL
When I was running the previous setup using a vacuum quenched single gap,
my NST bank (15kv @ 120ma) was only pulling 10 amps using a total of 302 uF
in PFC caps. I was expecting similar performance with the rotary gap.
Basic specs are:
6.5 x 26.5" secondary with 1,057 turns or 22 awg
.033uF MMC
1.8 kva NST's
Terry Filter
1/2 HP, 3,600 RPM motor
2 flying electrodes (1/8" tungsten, through disc design), for 120 BPS
Thanks for any insight,
~Dan
Kansas City area
_______________________________________________
Tesla mailing list
Tesla@xxxxxxxxxxxxxxxxxx
https://www.pupman.com/mailman/listinfo/tesla