[Home][2021 Index] [TCML] Re: Help with VTTC build(HF-201) [Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[TCML] Re: Help with VTTC build(HF-201)



Did you try holding a small fluorescent tube near the primary coil to see if it lights up?  Sometimes thesystem is oscillating but the tuning is not precise enough to produce any spark output.
And as Chris mentioned, you might just need to reverse the grid wires.
John  


-----Original Message-----
From: MIke Widlar <mike@xxxxxxxxxx>
To: tcml@xxxxxxxxxxxxxxx
Sent: Mon, Sep 13, 2021 10:45 pm
Subject: [TCML] Help with VTTC build(HF-201)

I'm looking for a direction to bring my project to life.  I'm attempting to
build a VTTC using a HF-201 vacuum tube.  I've attached the tube specs, as
built schematics and text file from JAVATC of my coil.  I am not seeing any
oscillation with my build.  For the plate voltage, I am using a large 1300
VAC transformer with a voltage multiplier.  It is using a Veriac to control
the input transformer voltage to allow control of the plate voltage.  I
have a suspicion that I don't have enough turns on the grid coil to induce a
large enough grid current, but I may be looking in the completely wrong
direction.  

 

Any input would be greatly appreciated. 

 

 

Thanks,

 

Mike

_______________________________________________
Tesla mailing list -- tcml@xxxxxxxxxxxxxxx
To unsubscribe send an email to tcml-leave@xxxxxxxxxxxxxxx
_______________________________________________
Tesla mailing list -- tcml@xxxxxxxxxxxxxxx
To unsubscribe send an email to tcml-leave@xxxxxxxxxxxxxxx